steering cylinder Sold to Italy

This article mainly introduces:

Italy hydraulic cylinder,steering cylinder manufacturer,steering cylinder

(Italy steering cylinder,produced by Hengyu Hydraulic Cylinder Factory）

steering cylinder are widely used in Italy，because of long service life，smooth movement，no need for deceleration device.So our company has designed steering cylinder for customers from Italy.

Introduction to steering cylinder:

The method of sleeve steering cylinder to improve the processing quality: there is a big gap in the service life of post-plating polishing and post-plating polishing, especially in mass production. Strictly clean the flying edge and burr of mechanical components, especially the edge of the sealing groove, and the tiny metal burr, strictly clean before assembly. The surface fatigue strength and stress corrosion resistance of the steering cylinder can be significantly improved by rolling in the finishing of the inner holes of the steering cylinder. The roughness of the surface of the friction pair is generally controlled between Ra0.4 and 0.8.

How to repair the steering cylinder body when it is damaged: When the steering cylinder has trace deformation and shallow tensile marks, the steering cylinder is repaired by strong honing process. The heavy honing process can repair steering cylinders up to 2.5 times out of tolerance than the original tolerance. It honed the parts with excessive size or shape error through a powerful honing machine, so that the overall size, shape tolerance and roughness of the steering cylinder can meet the technical requirements.

steering cylinder daily maintenance, should focus on checking whether the piston rod surface roughness and shape and position tolerance meet the technical requirements, if the piston rod bending should be calibrated to meet the requirements or according to the physical mapping, manufactured by a professional manufacturer. If the piston rod surface coating wear, slip damage, local spalling can be adopted to remove the coating, re-chrome surface processing process.

In the hydraulic system, sometimes the inner layer of the rubber hose is peeled off, so that the oil circuit is on and off, resulting in irregular steering cylinder action. Troubleshooting method: Replace the rubber hose.

Answers to some questions about steering cylinder:

Hydraulic cylinder application areas?
1, in the machine tool industry, 85% of the machine tool transmission system adopts hydraulic transmission and control. Such as grinding machine, milling machine, planer, broaching machine, press, shearing machine, and combined machine tools. 2, in the metallurgical industry, electric furnace control system, rolling mill control system, open furnace charging, converter control, blast furnace control, strip deviation and constant tension device are all using hydraulic cylinders. 3, in the construction machinery, the general use of hydraulic transmission, such as excavators, tire loaders, truck cranes, crawler bulldozers, tire cranes, self-propelled scrapers, graders and vibration rollers. 4, in agricultural machinery, the use of hydraulic cylinders is also widely used, such as combine harvesters, tractors and so on.

Injection molding machine die thimble on the side of the feed nozzle, the oil cylinder pull the thimble shift, how to debug the oil cylinder?
The cylinder is connected with the neutron of the injection molding machine, the neutron is retreated after the opening mold is in place, the cylinder taps the thimble plate to the top, and then takes, and the neutron is reset.