<table id="kaokc"><wbr id="kaokc"></wbr></table>
  • <rt id="kaokc"><delect id="kaokc"></delect></rt>
    <rt id="kaokc"></rt>
  • <li id="kaokc"><source id="kaokc"></source></li>
  • <rt id="kaokc"><delect id="kaokc"></delect></rt>
    High quality hydraulic equipment manufacturers!
    TELL:+8613184968882

    stroke adjustable cylinder Sold to Egypt

    Release time:2023-11-12 15:27:22 Hits: Current position: Home > News

    This article mainly introduces:

    Egypt hydraulic cylinder,stroke adjustable cylinder manufacturer,stroke adjustable cylinder

    Egypt stroke adjustable cylinder

    (Egypt stroke adjustable cylinder,produced by Hebei Hengyu company)

    stroke adjustable cylinder are widely used in Egypt,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed stroke adjustable cylinder for customers from Egypt.

    Introduction to stroke adjustable cylinder:

    When the stroke adjustable cylinder is customized, if there are high requirements for the quality of the stroke adjustable cylinder, it is best to use rolling processing, because the surface layer has surface residual compressive stress, which helps to close the surface of the small crack, preventing the expansion of erosion. Thus, the corrosion resistance of the surface can be improved, and the fatigue crack can be delayed or expanded, and the fatigue strength of the stroke adjustable cylinder can be improved. By rolling forming, a cold working hardening layer is formed on the rolling surface, which reduces the elastic and plastic deformation of the contact surface of the grinding pair, thereby improving the wear resistance of the inner wall of the stroke adjustable cylinder and avoiding the burn caused by grinding. After rolling, the reduction of surface roughness value can improve the matching property.

    After the stroke adjustable cylinder is installed, lubricating grease should be added to the relative moving parts such as earring and middle hinge shaft before trial operation.

    When the oil pressure of the stroke adjustable cylinder inlet is too low to reach the specified value, the leakage situation of the relevant oil system should be checked and the leakage should be eliminated; Check the piston and piston rod seal ring for damage, aging, loose and other phenomena; Check whether the hydraulic pump and pressure valve are faulty.

    In the case of serious wear on the inner surface of the stroke adjustable cylinder, or when there is a deep longitudinal tensile mark, it should be mapped according to the physical object and re-produced by the professional manufacturer according to the stroke adjustable cylinder manufacturing process for replacement. The stroke adjustable cylinder can also be repaired with TS311 antiwear repair agent. TS311 anti-wear repair agent is mainly used for the repair of worn and slipped metal parts.

    Answers to some questions about stroke adjustable cylinder:

    How does the one-way solenoid valve control the hydraulic cylinder circuit?
    If your cylinder is single-acting, you can use a one-way solenoid valve, such as some lifting platform hydraulic cylinder, the support valve used is one-way (two-position tee), that is, the cylinder extends out by the oil pressure top, the cylinder retracted by its own weight.

    What is hydraulic cylinder? How to use hydraulic cylinder? what is the application of hydraulic cylinder?
    Hydraulic cylinder is the hydraulic actuator that converts hydraulic energy into mechanical energy and does linear reciprocating movement (or swing movement). It is simple in structure and reliable in operation. When it is used to achieve reciprocating movement, the deceleration device can be eliminated, and there is no transmission gap, and the movement is smooth, so it is widely used in various mechanical hydraulic systems. The output force of the hydraulic cylinder is proportional to the effective area of the piston and the pressure difference between the two sides. The hydraulic cylinder is basically composed of cylinder body, cylinder head, piston, piston rod, sealing device, buffer device and exhaust device. Buffer device and exhaust device depending on the specific application, other devices are essential. Hydraulic cylinders are mainly used in machinery.

    Back to list Recommended article

    Leave a message if you have any questions.

    Send
    Email

    Email:hsslrubbertech@gmail.com7x24 hours

    Glad to receive your consultation!:

    Service
    Tel

    +8613184968882
    7x24hours service

    Add
    Wechat

    Add Wechat
    TOP
    主站蜘蛛池模板: 吴旗县| 驻马店市| 黄山市| 东安县| 中江县| 平山县| 五指山市| 丘北县| 顺昌县| 巴林左旗| 图片| 潞城市| 富锦市| 大新县| 广平县| 平舆县| 织金县| 都昌县| 格尔木市| 都昌县| 桐乡市| 米林县| 隆德县| 水城县| 襄城县| 射洪县| 离岛区| 华坪县| 宣威市| 灵石县| 泸溪县| 天台县| 正安县| 博客| 瓦房店市| 乐昌市| 漯河市| 龙岩市| 阜新| 平阳县| 雷山县|