<table id="kaokc"><wbr id="kaokc"></wbr></table>
  • <rt id="kaokc"><delect id="kaokc"></delect></rt>
    <rt id="kaokc"></rt>
  • <li id="kaokc"><source id="kaokc"></source></li>
  • <rt id="kaokc"><delect id="kaokc"></delect></rt>
    High quality hydraulic equipment manufacturers!
    TELL:+8613184968882

    HSG engineering cylinder Sold to Latvia

    Release time:2023-11-12 15:27:48 Hits: Current position: Home > News

    This article mainly introduces:

    Latvia hydraulic cylinder,HSG engineering cylinder manufacturer,HSG engineering cylinder

    Latvia HSG engineering cylinder

    (Latvia HSG engineering cylinder,produced by Hengyu Hydraulic Co., Ltd)

    HSG engineering cylinder are widely used in Latvia,because of smooth movement,high work efficiency,excellent fatigue and impact resistance.So our company has designed HSG engineering cylinder for customers from Latvia.

    Introduction to HSG engineering cylinder:

    The wear of the hard chromium plating layer of the HSG engineering cylinder is mostly caused by the grinding of the friction iron powder of the piston, and the wear is faster when there is water in the middle. Corrosion caused by the contact potential difference of the metal only occurs in the part of the piston contact, and the corrosion occurs in a point pattern. As mentioned above, when there is moisture in the middle, it will promote the development of corrosion. Compared with castings, the contact potential difference of copper alloy is higher, so the corrosion degree of copper alloy is more serious.

    The viscosity of the working oil used in the HSG engineering cylinder is 29~74mm2/S, and ISO VG46 anti-wear hydraulic oil is recommended. Working oil temperature within the range of -20~80. C. When the ambient temperature and service temperature are low, the oil with lower viscosity can be selected.

    The material of the sliding part of the HSG engineering cylinder piston sintered casting piston will cause sintering phenomenon when subjected to large transverse load. In this case, the sliding part of the piston should be made of copper alloy or welded to such material.

    Piston HSG engineering cylinder is widely used in hydraulic transmission. When the HSG engineering cylinder works, it mainly delivers hydraulic oil alternately to both sides of the piston in the HSG engineering cylinder, and uses the pressure difference of hydraulic oil on both sides of the piston to realize the reciprocating movement of the piston. If you want to speed up the forward speed of the piston, the return oil in the HSG engineering cylinder can be controlled by the valve and directly input into the inlet pipe to participate in the work of the piston to achieve rapid movement of the piston, but the thrust of the piston is reduced much.

    Answers to some questions about HSG engineering cylinder:

    How to distinguish high pressure cylinder and low pressure cylinder?
    There is no special definition of the cylinder, the so-called pressure classification refers to the pump low pressure (code L) container 0.1MPa ≤p < 1.6MPa; Medium pressure (code M) container 1.6MPa ≤p < 10.0MPa; High pressure (code H) vessel 10 MPa≤p < 100 MPa; Ultra-high pressure (code U) container p≥100MPa. (1MPa=9.8Kg)

    The inner diameter of the injection cylinder is 203.2mm and the diameter of the screw is 63.5mm. What is the enhancement ratio?
    Oil pressure multiplied by the cross-sectional area of the cylinder is equal to the theoretical output force value, and then multiplied by the efficiency of the cylinder is equal to the actual output force value, and the oil pressure can be calculated by inverting the value input.

    Back to list Recommended article

    Leave a message if you have any questions.

    Send
    Email

    Email:hsslrubbertech@gmail.com7x24 hours

    Glad to receive your consultation!:

    Service
    Tel

    +8613184968882
    7x24hours service

    Add
    Wechat

    Add Wechat
    TOP
    主站蜘蛛池模板: 乌兰察布市| 菏泽市| 中方县| 鄂托克前旗| 醴陵市| 张家界市| 平武县| 巴青县| 雷山县| 太康县| 黄骅市| 新平| 慈溪市| 大城县| 溆浦县| 潮州市| 麻江县| 麻阳| 曲水县| 祁门县| 顺昌县| 乐至县| 化州市| 安多县| 溆浦县| 吉安市| 辽宁省| 涞源县| 龙陵县| 安阳市| 包头市| 郁南县| 科技| 平乡县| 卢龙县| 灵川县| 古蔺县| 溧阳市| 临朐县| 漳平市| 清苑县|