<table id="kaokc"><wbr id="kaokc"></wbr></table>
  • <rt id="kaokc"><delect id="kaokc"></delect></rt>
    <rt id="kaokc"></rt>
  • <li id="kaokc"><source id="kaokc"></source></li>
  • <rt id="kaokc"><delect id="kaokc"></delect></rt>
    High quality hydraulic equipment manufacturers!
    TELL:+8613184968882

    synchronous hydraulic cylinder Sold to Saudi Arabia

    Release time:2023-11-12 15:30:16 Hits: Current position: Home > News

    This article mainly introduces:

    Saudi Arabia hydraulic cylinder,synchronous hydraulic cylinder manufacturer,synchronous hydraulic cylinder

    Saudi Arabia synchronous hydraulic cylinder

    (Saudi Arabia synchronous hydraulic cylinder,produced by Hengyu Hydraulic Cylinder Factory)

    synchronous hydraulic cylinder are widely used in Saudi Arabia,because of long service life,smooth movement,high work efficiency.So our company has designed synchronous hydraulic cylinder for customers from Saudi Arabia.

    Introduction to synchronous hydraulic cylinder:

    synchronous hydraulic cylinder and hydraulic station selection: Select the type and structure of the synchronous hydraulic cylinder according to the operation requirements of the main engine. According to the external load force borne by the synchronous hydraulic cylinder, such as gravity, friction force of the external mechanism, inertia force and working load, determine the load change law of the synchronous hydraulic cylinder in each stage of the stroke and the power value that must be provided. Determine the diameter of the piston and piston rod according to the working load of the synchronous hydraulic cylinder and the selected oil working pressure. the flow rate of the hydraulic pump is determined according to the movement speed of the synchronous hydraulic cylinder, the diameter of the piston and the piston rod.

    The meaning of the synchronous hydraulic cylinder model marked by the synchronous hydraulic cylinder manufacturer: for example, 160/100-1150, its meaning: from a professional point of view, 160 refers to the synchronous hydraulic cylinder diameter, which is 160mm, and the 100 behind refers to the rod diameter, which is 100mm. The 1150 refers to the synchronous hydraulic cylinder stroke, which is 1150mm. Therefore, on this point, we should have a correct understanding and can not make mistakes.

    The definition of the minimum starting pressure of the synchronous hydraulic cylinder refers to the minimum working pressure of the synchronous hydraulic cylinder in the no-load state, which is a comprehensive index reflecting the manufacturing and assembly accuracy of the synchronous hydraulic cylinder parts and the size of the sealing friction.

    Piston synchronous hydraulic cylinder is widely used in hydraulic transmission. When the synchronous hydraulic cylinder works, it mainly delivers hydraulic oil alternately to both sides of the piston in the synchronous hydraulic cylinder, and uses the pressure difference of hydraulic oil on both sides of the piston to realize the reciprocating movement of the piston. If you want to speed up the forward speed of the piston, the return oil in the synchronous hydraulic cylinder can be controlled by the valve and directly input into the inlet pipe to participate in the work of the piston to achieve rapid movement of the piston, but the thrust of the piston is reduced much.

    Answers to some questions about synchronous hydraulic cylinder:

    100 tons press, the cylinder diameter is 250, how much pressure?
    100 tons hydraulic press, if it is a single acting hydraulic cylinder, the required oil pressure is the nominal force divided by the cross-sectional area of the cylinder piston. One hundred tons of its pressure is 1000 kN (1000000N), the diameter of the cylinder is 250 mm, its area is the circular rate multiplied by the square of the radius, is 49062.5 square mm, and then the pressure divided by the area of the oil pressure is 20.38MPa. Therefore, a hydraulic pressure of 20.38 mpa is required for a 250 diameter cylinder to obtain 100 tons of pressure.

    How to exhaust hydraulic cylinder?
    Exhaust: The hydraulic system generally does not have exhaust, the use of the tank can exhaust, the oil operation will bring the gas back to the tank, and the tank can be communicated with the atmosphere. The gas will escape from the oil.

    Back to list Recommended article

    Leave a message if you have any questions.

    Send
    Email

    Email:hsslrubbertech@gmail.com7x24 hours

    Glad to receive your consultation!:

    Service
    Tel

    +8613184968882
    7x24hours service

    Add
    Wechat

    Add Wechat
    TOP
    主站蜘蛛池模板: 开鲁县| 梁山县| 娱乐| 奎屯市| 肥乡县| 鹤岗市| 平阴县| 鄂托克旗| 连山| 汾阳市| 化州市| 道孚县| 邹城市| 双鸭山市| 恩施市| 彰武县| 兰西县| 信宜市| 浑源县| 资兴市| 黑山县| 英德市| 施甸县| 土默特左旗| 崇文区| 桂平市| 滨州市| 长岭县| 含山县| 庆元县| 屯昌县| 南京市| 札达县| 台湾省| 安庆市| 普兰县| 安乡县| 衡阳县| 沙洋县| 泌阳县| 祥云县|