shearing machine cylinder Sold to Azerbaijan

This article mainly introduces:

Azerbaijan hydraulic cylinder,shearing machine cylinder manufacturer,shearing machine cylinder

(Azerbaijan shearing machine cylinder,produced by Hebei Hengyu company）

shearing machine cylinder are widely used in Azerbaijan，because of powerful torque，excellent temperature resistance，no transmission clearance.So our company has designed shearing machine cylinder for customers from Azerbaijan.

Introduction to shearing machine cylinder:

The difference between the plunger shearing machine cylinder and the piston shearing machine cylinder is that the piston in the shearing machine cylinder is replaced by a shaft plunger, which is used in hydraulic transmission requiring a long mechanical stroke, and can only input pressure oil from one direction, pressurize in a single direction, and form a thrust to push the plunger to move. The return trip of the plunger depends on the plunger itself to fall, and some rely on the spring to push back to the original position. Usually used plunger type shearing machine cylinder, its inner hole does not need mechanical finishing, as long as the plunger round grinding can be assembled.

The commonly used buffer structure of the shearing machine cylinder is composed of a piston boss and a shearing machine cylinder head groove. When the piston moves close to the shearing machine cylinder head, it gradually enters the groove, and the oil in the groove is extruded through the gap between the boss and the groove, which increases the oil return resistance, produces the braking effect and realizes the buffer. Generally, a buffer mechanism should be used when the pressure is above 10MP.

When the shearing machine cylinder is installed on the main engine, the oil port piping part and the guide sleeve should be checked for oil leakage in the running test, and the earring and the middle hinge shaft bearing should be refueled.

The shearing machine cylinder is a hydraulic actuator that converts hydraulic energy into mechanical energy and does linear reciprocating motion (or swinging motion). It is simple in structure and reliable in operation. When it is used to achieve reciprocating movement, the deceleration device can be eliminated, and there is no transmission gap, and the movement is smooth, so it is widely used in various mechanical hydraulic systems. The output force of the shearing machine cylinder is proportional to the effective area of the piston and the pressure difference between the two sides; The shearing machine cylinder is basically composed of shearing machine cylinder and shearing machine cylinder head, piston and piston rod, sealing device, buffer device and exhaust device. Buffer device and exhaust device depending on the specific application, other devices are essential.

Answers to some questions about shearing machine cylinder:

How to calculate the tonnage of the hydraulic press? Example: The input cylinder pressure is 5Mpa, the end area of the cylinder piston is 100mm, and how much is the thrust tonnage?
F=P*S=5*10^6*3.14*(1/20)^2=39250N.

How does the variable amplitude cylinder work?
The variable amplitude cylinder is generally an engineering hydraulic cylinder connected by the front and back earrings, and the telescopic expansion of the hydraulic cylinder changes the Angle of the arm of the lifting machinery to achieve the role of the variable amplitude, according to the role it plays is called the variable amplitude cylinder, and there is no variable amplitude hydraulic cylinder in the classification of hydraulic cylinders.