trunnion cylinder Sold to Congo

This article mainly introduces:

Congo hydraulic cylinder,trunnion cylinder manufacturer,trunnion cylinder

(Congo trunnion cylinder,produced by Hengyu Hydraulic Cylinder Factory）

trunnion cylinder are widely used in Congo，because of excellent fatigue and impact resistance，no need for deceleration device，long service life.So our company has designed trunnion cylinder for customers from Congo.

Introduction to trunnion cylinder:

When the trunnion cylinder is installed, the piston and the trunnion cylinder head and other parts have large mass, large size and large inertia, even if there is a lifting equipment auxiliary installation, because the specified clearance is small, no matter how hard it will be put into, therefore, the end of the piston or the trunnion cylinder head boss is easy to cause scars when it hits the inner surface of the trunnion cylinder wall. The solution to this problem: for a large number of small products, the use of autocratic assembly oriented tools during installation; For heavy, thick and large large and medium-sized trunnion cylinders, only careful and careful operation can be avoided.

When the trunnion cylinder needs to be disassembled for maintenance due to leakage and other faults, the piston should be moved to the bottom position of the trunnion cylinder, and hard beating and sudden drop are strictly prohibited during disassembly.

trunnion cylinder body inspection: The inner surface of the trunnion cylinder and the piston seal are the main factors causing the leakage in the trunnion cylinder, if the trunnion cylinder has a longitudinal tensile mark, even if the new piston seal is replaced, it can not effectively eliminate the fault, the inner surface of the trunnion cylinder mainly checks whether the dimensional tolerance and shape and position tolerance meet the technical requirements, there is no longitudinal tensile mark, and measures the depth of the longitudinal tensile mark, in order to take the corresponding solution.

The trunnion cylinder should be used correctly and maintained regularly. The trunnion cylinder should be deflated before use, the buffer regulating valve should be adjusted to a reasonable position, the cleanliness of the oil should be checked regularly, the dust on the trunnion cylinder should be cleaned regularly, and attention should be paid to waterproof and fireproof.

Answers to some questions about trunnion cylinder:

Slide weight 35 kg exit stroke 55mm, is it suitable to use 40 cylinder diameter cylinder?
The maximum output force of the 40-bore hydraulic cylinder can reach 2 tons, and whether it can be used depends on the use scenario. In addition, the problem of mechanism stuck has nothing to do with the size of the power source, and reasonable structural design and good machining and assembly accuracy are the key.

What is a differential cylinder?
The differential cylinder is by connecting the return oil of the rod cavity through the pipeline, allowing them to flow into the rodless cavity, thereby speeding up the extension speed of the piston rod. In fact, the cylinder is still the cylinder, but the oil circuit is related to the connection. The oil connection mode in which both chambers of a single rod hydraulic cylinder are fed hydraulic oil is called differential connection.