electric forklift hydraulic cylinder Sold to India

This article mainly introduces:

India hydraulic cylinder,electric forklift hydraulic cylinder manufacturer,electric forklift hydraulic cylinder

(India electric forklift hydraulic cylinder,produced by Hengyu Hydraulic Co., Ltd）

electric forklift hydraulic cylinder are widely used in India，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed electric forklift hydraulic cylinder for customers from India.

Introduction to electric forklift hydraulic cylinder:

When the electric forklift hydraulic cylinder is installed, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the electric forklift hydraulic cylinder head, earring (or middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent rigid interference and cause unnecessary damage.

If it is found that the electric forklift hydraulic cylinder lubrication is poor or the electric forklift hydraulic cylinder bore processing is abnormal, it is necessary to feedback the situation to the manufacturer, because the piston and the electric forklift hydraulic cylinder, the guide rail and the piston rod have relative movement, if the lubrication is poor or the electric forklift hydraulic cylinder bore is abnormal, it will aggravate the wear and reduce the straightness of the electric forklift hydraulic cylinder center line. In this way, when the piston works in the electric forklift hydraulic cylinder, the friction resistance will be large and small, resulting in slip or crawling. The solution is to repair and grind the electric forklift hydraulic cylinder first, and then prepare the piston according to the matching requirements, repair and grind the piston rod, and configure the guide sleeve.

The body of the electric forklift hydraulic cylinder on the processing process requirements: the body of the electric forklift hydraulic cylinder is an important and essential part of the electric forklift hydraulic cylinder, because it has an irreplaceable role. The processing requirements for this part are very high, requiring that the surface roughness of the electric forklift hydraulic cylinder after processing should reach 0.4-0.8um, and the coaxiality and wear resistance requirements are also very high.

The difference between the plunger electric forklift hydraulic cylinder and the piston electric forklift hydraulic cylinder is that the piston in the electric forklift hydraulic cylinder is replaced by a shaft plunger, which is used in hydraulic transmission requiring a long mechanical stroke, and can only input pressure oil from one direction, pressurize in a single direction, and form a thrust to push the plunger to move. The return trip of the plunger depends on the plunger itself to fall, and some rely on the spring to push back to the original position. Usually used plunger type electric forklift hydraulic cylinder, its inner hole does not need mechanical finishing, as long as the plunger round grinding can be assembled.

Answers to some questions about electric forklift hydraulic cylinder:

What is the cause of the sound of the excavator arm cylinder?
Hydraulic excavator cylinder includes boom cylinder, bucket rod cylinder and bucket cylinder, four cylinders. The sound of boom cylinder may be the wear of hydraulic cylinder block bushing, piston rod bushing and shaft pin. The main reason: poor lubrication, followed by improper clearance in the assembly process. Countermeasures: (1) Strictly lubricate each shaft pin at least once every 8 hours when the excavator is initially used for 100 hours and under harsh conditions; In other working conditions, lubricate each pin at least once every 50 hours. (2) If the lubricating oil passage is found to be blocked, it must be stopped for rectification. (3) Require assembly, replacement of all parts of the shaft pin, bushing strictly comply with the assembly testing standards and operating procedures.

What does cylinder hob125*100 mean?
HOB is a series of hydraulic cylinder products, the use of pressure 14MPA, tie rod structure. 125 refers to the diameter of the cylinder and 100 refers to the stroke. The unit is millimeters.