single rack cylinder Sold to Belgium

This article mainly introduces:

Belgium hydraulic cylinder,single rack cylinder manufacturer,single rack cylinder

(Belgium single rack cylinder,produced by Hengyu Group）

single rack cylinder are widely used in Belgium，because of powerful torque，clever hydraulic energy conversion，simple structure and reliable operation.So our company has designed single rack cylinder for customers from Belgium.

Introduction to single rack cylinder:

When the single rack cylinder is in use, once the seal and guide support ring are found to be defective, the seal with the same structural form and appropriate material should be replaced according to the structural form of the single rack cylinder seal to be repaired, so as to minimize the thickness of the oil film between the seal and the sealing surface and reduce the leakage of the seal.

When the piston speed of the single rack cylinder is high, the steel ball of the check valve flows with the oil flow, so that the valve hole is blocked, and the single rack cylinder moves irregularly. Elimination method: Replace the steel ball with a cone valve or spool with a guide shoulder.

If the seal of the single rack cylinder is softened and sticky, it may be that the seal is incompatible with the hydraulic oil or the nearby lubricating oil, replace the appropriate seal; If the seal becomes hard and loses elasticity, most of it is because the ambient temperature is too high (more than 80 ° C), make appropriate temperature insulation protection or replace the high temperature seal.

Factors that should be considered when selecting the oil seal in the single rack cylinder: some specific factors should be taken into account when selecting the oil seal in the single rack cylinder, so as to have correct consideration and get accurate results, and then avoid wrong selection. The factors and aspects that should be taken into account are eight: single rack cylinder diameter, piston rod diameter, piston rod and piston groove size, single rack cylinder working pressure, single rack cylinder movement speed, hydraulic system oil temperature and single rack cylinder working environment.

Answers to some questions about single rack cylinder:

How big is a 300-ton cylinder piston?
The rated pressure of the oil pump is 31.5 mpa, the nominal pressure of the hydraulic press is 3150 kN, then the calculated cross-sectional area of the cylinder: S=3150000/31500000=0.1 square meters diameter is: 2* root sign (0.1/3.14) =2*0.178 m =0.356 m 3150 kN hydraulic press is commonly equipped with 31.5 mpa 63 l/min axial piston pump. There are many variable forms of axial piston pump, and the motor size of the pump with the same flow and pressure is not uniform. 31.5 mpa 63 L/min automatic variable pump, can be equipped with 15 kW 4 stage motor; The manual variable pump needs to be equipped with 22 kW 4-stage motor.

How many kilograms can the 63 cylinder hold?
The force of the cylinder is related to the cylinder diameter and pressure. 63 cylinder diameter (cylinder inner circle diameter), 21MPA pressure, thrust 6 tons.