<table id="kaokc"><wbr id="kaokc"></wbr></table>
  • <rt id="kaokc"><delect id="kaokc"></delect></rt>
    <rt id="kaokc"></rt>
  • <li id="kaokc"><source id="kaokc"></source></li>
  • <rt id="kaokc"><delect id="kaokc"></delect></rt>
    High quality hydraulic equipment manufacturers!
    TELL:+8613184968882

    trunnion cylinder Sold to New Zealand

    Release time:2023-11-10 08:35:12 Hits: Current position: Home > News

    This article mainly introduces:

    New Zealand hydraulic cylinder,trunnion cylinder manufacturer,trunnion cylinder

    New Zealand trunnion cylinder

    (New Zealand trunnion cylinder,produced by Hengyu Hydraulic Co., Ltd)

    trunnion cylinder are widely used in New Zealand,because of smooth movement,high work efficiency,excellent fatigue and impact resistance.So our company has designed trunnion cylinder for customers from New Zealand.

    Introduction to trunnion cylinder:

    trunnion cylinder diameter, rod diameter, stroke determination: Choose national standards or other standards trunnion cylinder, avoid the selection of non-standard size, otherwise the difficulty of processing and manufacturing costs will be increased. The length of the trunnion cylinder guide is determined by the length of the stroke. Check the strength of trunnion cylinder, piston rod, screw, etc. according to the working pressure or load. At the same time, working pressure, ambient temperature, working medium and running speed are also the key to selecting seals.

    When the oil pressure of the trunnion cylinder inlet is too low to reach the specified value, the leakage situation of the relevant oil system should be checked and the leakage should be eliminated; Check the piston and piston rod seal ring for damage, aging, loose and other phenomena; Check whether the hydraulic pump and pressure valve are faulty.

    trunnion cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

    trunnion cylinder hydraulic oil selection: The recommended working oil viscosity of the trunnion cylinder is 10 ~ 110cSt (1.8 ~ 15E), ISO VG46 hydraulic oil. The normal working oil temperature is 10 ~ 70℃, and the ambient temperature is in the range of -20 ~ 80℃. When the ambient temperature and service temperature are low, the hydraulic oil with lower viscosity can be selected.

    Answers to some questions about trunnion cylinder:

    What steel pipe does hydraulic cylinder use? This problem is very general. Carbon steel pipe or ordinary seamless steel pipe are all ok, but then there are rolling, quilting, heat treatment and other steps, and the requirements are different, the wall thickness is different, the material is different. It depends on the circumstances.

    In hydraulic equipment, is the motor power related to the cylinder pressure holding time?
    Irrelevant. The motor only drives the plunger in the hydraulic cylinder of the oil pump to extend out, and stops when the set pressure is reached; The length of the pressure holding time is related to the sealing degree of the hydraulic cylinder and the solenoid valve.

    Back to list Recommended article

    Leave a message if you have any questions.

    Send
    Email

    Email:hsslrubbertech@gmail.com7x24 hours

    Glad to receive your consultation!:

    Service
    Tel

    +8613184968882
    7x24hours service

    Add
    Wechat

    Add Wechat
    TOP
    主站蜘蛛池模板: 育儿| 科尔| 张北县| 丽江市| 文昌市| 建始县| 白朗县| 郴州市| 兴国县| 余庆县| 富源县| 潜山县| 高淳县| 邵阳市| 鸡东县| 鄂州市| 大荔县| 定日县| 灵石县| 肃北| 岱山县| 个旧市| 新郑市| 鹰潭市| 巴林左旗| 尚义县| 遵义市| 鄂伦春自治旗| 纳雍县| 科技| 海宁市| 赤壁市| 永胜县| 吴忠市| 阿拉善左旗| 贡觉县| 丰原市| 乐东| 潍坊市| 通州市| 遵化市|