<table id="kaokc"><wbr id="kaokc"></wbr></table>
  • <rt id="kaokc"><delect id="kaokc"></delect></rt>
    <rt id="kaokc"></rt>
  • <li id="kaokc"><source id="kaokc"></source></li>
  • <rt id="kaokc"><delect id="kaokc"></delect></rt>
    High quality hydraulic equipment manufacturers!
    TELL:+8613184968882

    tailplate hydraulic cylinder Sold to Nigeria

    Release time:2023-11-06 22:53:44 Hits: Current position: Home > News

    This article mainly introduces:

    Nigeria tailplate hydraulic cylinder,tailplate hydraulic cylinder manufacturer

    Nigeria tailplate hydraulic cylinder

    (Nigeria tailplate hydraulic cylinder,produced by Hengyu Group)

    tailplate hydraulic cylinder are widely used in Nigeria,because of powerful torque,clever hydraulic energy conversion,no transmission clearance.So our company has designed tailplate hydraulic cylinder for customers from Nigeria.

    Introduction to tailplate hydraulic cylinder:

    The internal leakage of the tailplate hydraulic cylinder is an important indicator to measure the quality of the tailplate hydraulic cylinder: the internal leakage of the tailplate hydraulic cylinder will reduce the volumetric efficiency, increase the temperature rise of the oil, affect the positioning accuracy of the tailplate hydraulic cylinder, so that the tailplate hydraulic cylinder can not accurately and stably stop in a certain position of the tailplate hydraulic cylinder, so it is one of the main indicators of the tailplate hydraulic cylinder.

    The difference between the plunger tailplate hydraulic cylinder and the piston tailplate hydraulic cylinder is that the piston in the tailplate hydraulic cylinder is replaced by a shaft plunger, which is used in hydraulic transmission requiring a long mechanical stroke, and can only input pressure oil from one direction, pressurize in a single direction, and form a thrust to push the plunger to move. The return trip of the plunger depends on the plunger itself to fall, and some rely on the spring to push back to the original position. Usually used plunger type tailplate hydraulic cylinder, its inner hole does not need mechanical finishing, as long as the plunger round grinding can be assembled.

    When installing the tailplate hydraulic cylinder pipe, the pipe should be cleaned after installation, and should not pass through the tailplate hydraulic cylinder block, and the by-pass pipe must be installed in front of the oil port of the tailplate hydraulic cylinder block. This is important. Otherwise, the foreign body in the pipeline will enter the tailplate hydraulic cylinder, and once it enters, it is difficult to exclude it, but it becomes a foreign body transported to the tailplate hydraulic cylinder. Moreover, when cleaning, the removal method of foreign bodies entered in the installation pipeline operation should be considered. In addition, the corrosion in the pipe should be pickling and other procedures before the pipe installation, and the rust must be completely removed.

    The tailplate hydraulic cylinder is mainly composed of body, piston, piston rod, tailplate hydraulic cylinder head, tailplate hydraulic cylinder bottom, piston rod head and related auxiliary devices. The piston divides the tailplate hydraulic cylinder into two chambers, and moves reciprocally in the tailplate hydraulic cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the tailplate hydraulic cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the tailplate hydraulic cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the tailplate hydraulic cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the tailplate hydraulic cylinder bottom and the tailplate hydraulic cylinder head is serious, so the buffer deceleration should be set at both ends of the tailplate hydraulic cylinder The working medium of the tailplate hydraulic cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; tailplate hydraulic cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the tailplate hydraulic cylinder: The buffer structure of the tailplate hydraulic cylinder is to prevent the piston from colliding with the tailplate hydraulic cylinder head at the end of the stroke.

    Answers to some questions about tailplate hydraulic cylinder:

    What are the problems that cause hydraulic cylinder shaking?
    1, the oil supply is not smooth, the hydraulic oil filter is half blocked. 2. The oil level in the oil storage tank is lower than the minimum oil level. 3, there is air in the hydraulic system. 4, the supply oil pump is damaged or not working properly. 5, the hydraulic oil is not replaced for a long time.

    What factors does the movement speed of the cylinder in the hydraulic system depend on?
    The hydraulic system should be the piston movement in the cylinder, and the speed should also be the speed of the piston, according to the piston speed formula: v=4qm/pai*(D^2-d^2) where q is the flow rate of the input hydraulic cylinder, m is the volumetric efficiency of the hydraulic cylinder, D, d is the diameter of the piston and piston rod, because other factors are determined, the movement speed of the cylinder depends on the flow rate.

    Back to list Recommended article

    Leave a message if you have any questions.

    Send
    Email

    Email:hsslrubbertech@gmail.com7x24 hours

    Glad to receive your consultation!:

    Service
    Tel

    +8613184968882
    7x24hours service

    Add
    Wechat

    Add Wechat
    TOP
    主站蜘蛛池模板: 保亭| 遂川县| 汕头市| 华坪县| 湘潭市| 清流县| 奎屯市| 搜索| 砚山县| 中山市| 清水县| 泾川县| 玉山县| 额尔古纳市| 女性| 连云港市| 喀喇| 临泽县| 中超| 门头沟区| 大田县| 南皮县| 平乡县| 保靖县| 宽城| 芷江| 新疆| 宁安市| 红河县| 广宁县| 微博| 平武县| 仙居县| 罗江县| 德令哈市| 临武县| 丰原市| 综艺| 桃江县| 黄骅市| 杭州市|